Quinder programmer kit for 48V and 60V Controllers

Quinder programmer kit for 48V and 60V Controllers
Quinder programmer kit for 48V and 60V Controllers
Quinder Programming Set for 48V and 60V DC Controllers With the Quinder programming set, the riding characteristics of the Quinder 48V and 60V HUB motors can be adjusted via this controller....

Product number

10551025

Request a quotation
 

Quinder Programming Set for 48V and 60V DC Controllers

With the Quinder programming set, the riding characteristics of the Quinder 48V and 60V HUB motors can be adjusted via this controller.

APPS

The set uses two apps that run on Windows computers. The Rewrite app allows settings to be adjusted, and the ProClient app allows the settings to be uploaded to the controller. Both apps are available for free from us. We send the apps in a .zip file via WeTransfer. Since it is impossible to read out the controller, we also provide the original .sys file. This file can be used as a starting point from which adjustments can be made.
Here is a link to download the ProClient1.4.zip file.
Here is a link to download the Rewrite.zip file

Programming Manual

Install both programs on a Windows operating system.
The .bin file must first be sent to the programming box, and only after that should the box be connected to the controller. So, follow the 6 steps from the manual below first.
ProClient1.4 Manual
Once the controller gives an OK and beeps, a connection can be made to the controller.
Make sure nothing is connected to the controller before connecting the programming cable to the corresponding cable of the controller.
The file to be uploaded is a .bin file. It is not possible to download the default .bin file from the controller. Uploading is the only option.

With the Rewrite software, you can adjust the configuration of the .bin file. The settings that can be modified are listed in the manual, which can be downloaded below.
Rewrite Manual
To start, the original .bin file must be uploaded into the Rewrite software.
This file can be downloaded below.

original.bin file
This file is for CT020201DLXD-02 controllers.
Once the .bin file is loaded into the Rewrite software, you can make changes.
Save the edited file under a different name.

⚠️ WARNING: Never change fields that are not mentioned in the manual. This may cause irreparable damage to the motor and controller.

If you have any questions about programming, feel free to contact us.

Buy/Rent/Outsource

If riding characteristics need to be adjusted frequently, it is advisable to purchase this kit. If you only need the kit for a short time to find the correct settings, it can also be rented. If you know exactly which settings are required, we can perform the programming for you. Contact us for more information.