PMA Programmable 24V DC 150A Controller
This controller is suitable for permanent magnet DC motors. The controller offers the option of controlling the speed via a 5K POT meter (0-5)
Technical details
- Working voltage: 24 Volt
- Minmial working voltage: 16 volt
- Max working voltage: 32 Volt
- Maximum current for 1 hour (controller mounted on heatsink, ambient temperature 20°C, natural ventilation): 60 Amperes
- Maximum current limit (1 minute): 150 Amperes
- Switching frequency: 15 kHz
- Minimum / maximum temperature: -20 / +40°C
- Voltage limit (minimum): 16 V at 25°C
- Motor voltage at nominal load (Imot = 40 A): 23.4 V (with 24 V battery, 25°C)
Computer programming
The Controller can be programmed for a number of characteristics, namely;
1. Acceleration - standard setting: 80%
2. Deceleration - standard setting 90%
3. Maximum forward speed - standard setting 100%
4. Maximum reverse speed - standard setting 100%
5. Drive direction - standard setting fwd and rev
6. NOT in use
7. NOT in use
8. Time for activating the electric brake
9. Max current - standard setting 100%
Optionally available programmer unit
NB! You need a separate programming unit to program. If you need this once, you can also borrow it or we can program the settings for you. Ask about the options by phone +31 575 513 503
Thumb throttle
This controller is NOT working with 5V Hall throttles.
