PMA Programmable 24V DC 150A Controller
This controller is suitable for permanent magnet DC motors. The controller offers the option of controlling the speed via a 5K POT meter (0-5) or (5-0-5)
Technical details
- Working voltage: 24 Volt
- Minmial working voltage: 16 volt
- Max working voltage: 32 Volt
- Maximum current for 1 hour (controller mounted on heatsink, ambient temperature 20°C, natural ventilation): 60 Amperes
- Maximum current limit (1 minute): 150 Amperes
- Switching frequency: 15 kHz
- Minimum / maximum temperature: -20 / +40°C
- Voltage limit (minimum): 16 V at 25°C
- Motor voltage at nominal load (Imot = 40 A): 23.4 V (with 24 V battery, 25°C)
Computer programming
The Controller can be programmed for a number of characteristics, namely;
Acceleration
Deceleration
Maximum forward speed
Maximum reverse speed
Deceleration time of the electric brake
Reverse reaction speed. Turn from full throttle forward to reverse or vice versa.
Available models
50301085 Potentiometer 5-0 controller
50301086 Potentiometer wig-wag controller 5-0-5
Optionally available programmer unit
NB! You need a separate programming unit to program. If you need this once, you can also borrow it or we can program the settings for you. Ask about the options by phone +31 575 513 503
Thumb throttle
This controller is NOT working with 5V Hall throttles.
