The Quinder 48V 8-inch hub motor with high-precision encoder is engineered for applications that require ultra-smooth, accurate, and reliable motion control. This advanced robot hub motor is ideal for AGVs, autonomous greenhouse vehicles, and mobile robots that need stable low-speed performance without vibration or stuttering.

Thanks to its integrated encoder technology, this hub motor with encoder delivers exceptional control and efficiency—even at very low speeds.

🚜 Ideal for AGVs and Greenhouse Robotics

This 48V hub motor for AGV and robotic applications is perfectly suited for:

• Autonomous greenhouse vehicles
• AGVs (Automated Guided Vehicles)
• Mobile robots and robotic platforms
• Low-speed applications requiring high precision
• Driving on uneven terrain without vibration

⚙️ High-Precision Encoder Technology

Unlike standard hub motors, this electric hub motor with encoder features a factory-integrated sine-cosine magnetic encoder for superior control.

• 20 magnets on the rotor (10 pole pairs)
• Analog Hall-effect sensors for accurate magnetic field measurement
• 14-bit resolution per pole pair (16,384 steps)
• Up to 819,200 steps per wheel revolution

This results in:

• Ultra-smooth commutation
• High-precision positioning
• No cogging or vibration at low speed

🎯 Smooth and Accurate Low-Speed Performance

This precision hub motor is specifically designed for applications where low-speed control is critical.

Compared to standard motors, this low-speed hub motor for robots provides:

• Stable and consistent motion
• Whisper-quiet operation
• Extremely accurate positioning

Perfect for AGVs and greenhouse robots that require millimeter-level control.

🔧 Optimized for ODrive and Easy Integration

This hub motor for robotics applications is fully optimized for modern motor controllers:

• Compatible with ODrive (position, velocity, torque control)
• Simple setup (configured as 1 pole pair)
• Automatic calibration after one wheel rotation
• Dual RS-485 interface (≥ 1 Mbps)
• AMT21-compatible communication protocol
• Optional debugging and firmware update tools

🛡️ Rugged, Waterproof and Maintenance-Free

Built for demanding environments, this IP66 hub motor is fully sealed and reliable:

• IP66 rated (dustproof and waterproof)
• Designed for greenhouse and outdoor use
• Temperature range: –20 °C to +40 °C
• Maintenance-free operation

Ideal for long-term use in agricultural robotics and industrial environments.

📊 Key Specifications

• 48V BLDC hub motor with 8-inch rim
• Direct tire mounting (4.00-8 tire)
• 10 pole pairs with 5:1 planetary gearbox
• 14-bit sine-cosine magnetic encoder
• Up to 819,200 steps per wheel revolution
• Integrated thermistor (ODrive compatible)
• Maximum speed: ≥ 2 m/s (application dependent)

🚀 Why Choose This Hub Motor with Encoder?

• No vibration or stuttering at low speed
• High-resolution feedback for precise control
• Plug & play hub motor solution
• Designed for AGVs and greenhouse robots
• Scalable and future-proof

📦 Order Your 48V Hub Motor with Encoder

The Quinder 48V hub motor with encoder is available now as a complete, ready-to-use solution.

Contact us for:

• Volume pricing
• Integration support
• Custom configurations

🗃️ CAD files available: 3D STEP files

This controller is spare part no. G076091 for the PRAMAC electrically powered pallet truck.

Technical specifications

Voltage: 24 volts
Minimum voltage: 16 volts
Maximum voltage: 32 volts
Maximum current: 60 amps (for 1 hour with active cooling)
Maximum current: 150 amps (for max. 1 minute)
Switching frequency: 15 kHz
Minimum operating temperature: −20 °C
Maximum operating temperature: +40 °C
Motor voltage at nominal load (Imot = 40 A):
23.4 V at (24 V battery, 25 °C)
Weight: 850 g

This controller is suitable for permanent magnet DC motors. The controller offers the option of controlling the speed via a 5K POT meter (0-5) or (5-0-5)

Technical details

• Working voltage: 24 Volt
• Minmial working voltage: 16 volt
• Max working voltage: 32 Volt
• Maximum current for 1 hour (controller mounted on heatsink, ambient temperature 20°C, natural ventilation): 60 Amperes
• Maximum current limit (1 minute): 70 Amperes
• Switching frequency: 15 kHz
• Minimum / maximum temperature: -20 / +40°C
• Voltage limit (minimum): 16 V at 25°C
• Motor voltage at nominal load (Imot = 40 A): 23.4 V (with 24 V battery, 25°C)

Computer programming

The Controller can be programmed for a number of characteristics, namely;
1. Acceleration - standard setting: 80%
2. Deceleration - standard setting 90%
3. Maximum forward speed - standard setting 100%
4. Maximum reverse speed - standard setting 100%
5. Drive direction - standard setting fwd and rev
6. NOT in use
7. NOT in use
8. Time for activating the electric brake
9. Max current - standard setting 100%

Optionally available programmer unit

NB! You need a separate programming unit to program. If you need this once, you can also borrow it or we can program the settings for you. Ask about the options by phone +31 575 513 503

You can download the controller manual here

Thumb throttle

This controller is NOT working with 5V Hall throttles.

This controller is suitable for permanent magnet DC motors. The controller offers the option of controlling the speed via a 5K POT meter (0-5)

Technical details

• Working voltage: 24 Volt
• Minmial working voltage: 16 volt
• Max working voltage: 32 Volt
• Maximum current for 1 hour (controller mounted on heatsink, ambient temperature 20°C, natural ventilation): 60 Amperes
• Maximum current limit (1 minute): 150 Amperes
• Switching frequency: 15 kHz
• Minimum / maximum temperature: -20 / +40°C
• Voltage limit (minimum): 16 V at 25°C
• Motor voltage at nominal load (Imot = 40 A): 23.4 V (with 24 V battery, 25°C)

Computer programming

The Controller can be programmed for a number of characteristics, namely;
1. Acceleration - standard setting: 80%
2. Deceleration - standard setting 90%
3. Maximum forward speed - standard setting 100%
4. Maximum reverse speed - standard setting 100%
5. Drive direction - standard setting fwd and rev
6. NOT in use
7. NOT in use
8. Time for activating the electric brake
9. Max current - standard setting 100%

Optionally available programmer unit

NB! You need a separate programming unit to program. If you need this once, you can also borrow it or we can program the settings for you. Ask about the options by phone +31 575 513 503

You can download the controller manual here

Thumb throttle

This controller is NOT working with 5V Hall throttles.

The Globus ETKXXXX E-TRIKE 60V is an innovative, lightweight electric tool carrier designed for sustainable farming. Its powerful 60V electric motor and smart 3-wheel sidecar layout combine efficiency, versatility and environmental friendliness.

🔧 Key features

• Quinder 60V hub motor with planetary wheel drive

• No chain drive → less maintenance and no power loss

• Top speed: 12 km/h

• Lightweight design for soil-friendly operation

• Whisper-quiet and low-maintenance

🌾 Applications

The E-TRIKE is widely applicable in agriculture:

• Mechanical weed control – sustainable alternative to chemicals

• Row fertilization – precise application between crops

• LvS spraying technology – efficient, targeted spraying

• Expandable with GPS for maximum precision

✅ Benefits of the Globus E-TRIKE

• Electric tool carrier with long service life

• Battery life up to 8 hours of mechanical weed control

• Sustainable, quiet and environmentally friendly

• Low maintenance thanks to direct wheel drive

• Highly versatile with various options and accessories

⚙️ Options & extensions

• GPS integration for precision farming

• Additional batteries for longer runtime

• Various implements for specific crops

🌍 Sustainability & ease of use

The Globus E-TRIKE ETK helps farms transition to a sustainable, future-proof cultivation system. Lower CO₂ emissions, less noise and reduced maintenance make it ideal for modern, professional agriculture.

📩 Request a quote or demo

Looking for a reliable, sustainable solution for mechanical weed control and precision farming? Contact us today for more information or a no-obligation demonstration of the Globus ETKXXXX E-TRIKE 60V tool carrier.

Hens Hinloopen +31 651 629 577
henshinloopen@gmail.com

The Globus MET01 is an innovative, compact tool carrier that excels in flexibility, maneuverability, and sustainability. This unique E-trike is equipped with an electric drive powered by a Quinder HUB motor, a central front-wheel configuration with planetary drive, and an in-wheel motor. It reaches a maximum speed of 6 km/h and delivers outstanding performance in various cultivation tasks.

Lightweight design for soil-friendly operation

Thanks to its light weight, the MET01 applies minimal pressure to the soil, helping preserve a healthy soil structure – essential for sustainable farming.

Versatile applications in crop care and weed control

The Globus MET01 is designed for a wide range of tasks, including:

• Mechanical weed control with hoeing units or other implements

• Chemical or biological crop care with modern LvS spraying technology

• Row fertilization with various dosing systems

With its modular design and multiple options such as LvS units and spray hoods, the MET01 can be easily adapted to growers’ specific needs.

Electric drive with Quinder HUB motor

The powerful and reliable Quinder HUB motor ensures quiet, emission-free, and efficient operation. The optional high-capacity, swappable lithium battery provides up to 4 hours of continuous mechanical weed control on a single charge.

Key benefits of the Globus MET01:

✔ Compact and maneuverable tool carrier with central front-wheel configuration
✔ Electric drive with Quinder HUB motor for emission-free, powerful work
✔ Low soil compaction thanks to lightweight design
✔ Versatile for weed control, crop care, and fertilization
✔ Long working time with swappable lithium batteries

With the Globus MET01, you choose a modern, sustainable, and versatile solution that takes weed control and crop care to the next level.

Contact

Discover how the Globus MET01 can support your business in sustainable weed control and efficient crop care.

For more information, please contact:
Hens Hinloopen
📞 +31 651 629 577
📧 henshinloopen@gmail.com

The Globus Multi-E-Wagen SPK04 is an innovative, modular tool carrier with electric drive powered by strong Quinder HUB motors. Equipped with dual wheels, this machine combines stability with low soil compaction – ideal for sustainable and professional crop care.

Versatile applications for crop care

The SPK04 can be easily adapted for various tasks and offers different methods of crop care:

• Chemical or biological crop care with modern LvS technology

• Mechanical weed control with hoes or tine cultivator

• Combined weed control and fertilization with a row applicator with multiple outlets

Thanks to its modular design, applications can be quickly and easily switched, enabling efficient transitions between different cultivation tasks.

Sustainability through electric drive

The reliable Quinder HUB motors ensure quiet, emission-free operation with excellent traction. This makes the SPK04 not only environmentally friendly but also highly suitable for precision work between rows.

Key benefits of the SPK04:

✔ Sustainable and emission-free with Quinder HUB electric drive
✔ Minimal soil compaction thanks to dual wheels
✔ Versatile for both organic and conventional crops
✔ Time-saving with quick and easy conversion

With the Globus Multi-E-Wagen SPK04, you choose the perfect balance of sustainability, flexibility, and power – the solution for modern, efficient, and eco-friendly crop care and weed control.

Contact

Discover how the Globus Multi-E-Wagen SPK04 can support your business in sustainable weed control and efficient crop care.

For more information, please contact:
Hens Hinloopen
📞 +31 651 629 577
📧 henshinloopen@gmail.com

This guide will walk you through the process of replacing the ON/OFF switch or the SLOW button on your E-PowerBarrow electric wheelbarrow. The switch also features a green/red LED to indicate the battery status (low or normal operation).

Tools Needed:

• Soldering iron (for experienced users)
• Small screwdriver
• Sharp object (like a small knife or pin)

Step-by-Step Replacement:

1. Prepare the E-PowerBarrow:

   • Position the wheelbarrow with the handlebar facing up.

2. Remove the Throttle Housing:

   • Locate the 4 screws on the bottom side of the blue throttle housing.
   • Carefully remove the screws (be cautious as they are small and easy to lose).
   • Unplug the connector from the housing.

3. Return the Wheelbarrow to Normal Position:

   • Set the wheelbarrow back in its usual upright position.

4. Remove the Yellow Throttle Cap:

   • Use a sharp object to gently remove the black rubber dot from the top of the yellow throttle.
   • Unscrew the screw revealed by the rubber dot to take off the yellow throttle cap.

5. Access the PCB Board:

   • Put the wheelbarrow back with the handlebar facing up again.
   • Remove the two screws securing the PCB (printed circuit board) to the housing.
   • Carefully take out the PCB board.

6. Replace the Switches:

   • With the PCB board removed, you can now replace the ON/OFF and SLOW switches.
   • If you find soldering difficult or are unsure, feel free to send the PCB to us for replacement of the switches.

Important Notes:

• If you are not experienced with soldering, we highly recommend sending the PCB board to us to avoid damage.
• Always handle the small screws with care to prevent losing them.

By following these steps, you should be able to successfully replace the switches on your E-PowerBarrow.

The TreeWheeler is an innovative electric tricycle designed for ergonomic low working position, such as low pruning and plant maintenance in tree nurseries. Powered by the reliable Quinder 48V hub motor, it combines comfort, efficiency and sustainability.

🔧 Key features

• Quinder 48V hub motor for quiet, reliable drive

• Infinitely variable speed: 0–6 km/h

• Rotating, height-adjustable seat (32–58 cm)

• Flexible control: finger, foot or knee via magnetic switch

• Dimensions: 365 × 55 × 70 cm | Weight: approx. 85 kg

• Max. load: 120 kg

• 48V battery + charger included

• Solid rubber rear wheels

• CE-compliant, with English manual

🌾 Applications in tree nursery & plant care

• Low pruning of young trees and plants

• Plant maintenance close to the ground

• Ergonomic work in tree nurseries

• Comfortable alternative to manual work

✅ Benefits of the TreeWheeler

• Relieves back & knees during low working position

• Battery life up to 8 hours

• Sustainable, quiet & eco-friendly

• Low maintenance with direct wheel drive

• Versatile with options and accessories

⚙️ Options & accessories

• 🌿 Crop guide for heavier plants

• 🌀 Tube holder

• 🌞 Parasol holder

• 🔋 Spare battery

• ⛺ Canopy for all-weather work

🌍 Sustainability & ease of use

The TreeWheeler supports growers in the transition to sustainable, ergonomic tree nursery work. Lower CO₂ emissions, less noise and minimal maintenance make it perfect for modern, professional horticulture.

📩 Request a quote or demo

Looking for a reliable and ergonomic solution for low pruning, plant maintenance and working close to the ground? Contact us for more information or a demo of the TreeWheeler.

Price on request. Available from stock.

Specifications:

• red: power positive
• black: power negative
• yellow: swich in
• blue switch out
• green: signal output

Price on request. Available from stock.

Electronic brake vs mechanical brake

In addition to the electronic brake, we always recommend using a mechanical brake, provided a braking function is required. An electronic brake should not actually be considered a brake, but rather a deceleration aid. The braking function of an electronic brake is entirely dependent on the electrical system and the voltage within that system. If the battery is empty, the brake will no longer work, and if the machine is turned off, the brake will disappear. In short, if you require a braking function for safety reasons, always use these brake discs.

Price on request